S-600 Series

S-600 Series

Do you need loading dock seals for smaller doors? Then look no further than the Serco S-600 Series foam dock seal with an included head pad. Ideal for doors 9’ wide x 9’ high or less, the S-600 model automatically seals as the trailer backs up against its foam pads, instantly creating a tight seal between the interior and exterior environments and protecting both employees and products from snow, ice, rain, dirt, and debris.

S-700 Series

S-700 Series

The Serco S-700 Series foam dock seal with a head curtain can accommodate a wider range of vehicle heights and is ideal for industrial doors that are 9 feet high or taller. The Serco S-700 Series's hood-style head curtain will seal the back of your vehicle while the end caps secure the drop curtain to the side pads. Its durable fiberglass stays provide stiffness in the top of the curtain for better moisture drainage, while rugged, roll-formed galvanized steel framing increases durability. Seamless aluminum tubing provides the head curtain with additional support.

S-800 Series

S-800 Series

The Serco S-800 Series foam dock seal with its adjustable head pad provides you with a sturdy seal for a large range of trailer heights. The manually adjustable head pad allows you to position it onto a 48-inch vertical track. A standard 18-inch high foam head pad mounts on a heavy-gauge steel pad.

S-3000L

S-3000L

The reliable and versatile Serco S-3000L Series L-shaped side pad foam dock seal with head pad provides full-width access to a trailer when docked at doors up to 9 feet high. Premium features include a compression foam head pad with L-shaped side pads that come equipped with triangular-shaped foam wedges to offer added support, along with roll-formed galvanized steel framing.

S-3000HL

S-3000HL

The Serco S-3000HL Series L-shaped side pad foam dock seal is an option that features a modular hood-style head curtain and accommodates several different trailer widths and provides complete access to vehicles docked at doors with openings over 9 feet high. This selection won’t over-compress due to extra projection required on similar competitive models. It also includes the rugged, roll-formed galvanized steel framing that’s a Serco dock seal standard.

S-1000

S-1000

You can find ultimate sealing effectiveness, even when your trailer is docked off-center, with the Serco S-1000 Series Ultra-Seal® foam dock seal with a head pad. This accommodating seal can handle a wide variety of trailer widths up to 8 feet and 6 inches. The head pad and side pads work together to seal along the top edge and hinge gap on trailers without blocking the doorway. Find better access to the back of your trailer with the Serco S-1000 Series Ultra-Seal® foam dock seal.

S-2000

S-2000

With the S-2000 Series Ultra-Seal foam dock seal with head curtain, you can expect a tight sidewall seal and the additional benefit of a hood-style head curtain for application with taller doorways while reducing building wall pressure. This option's modular hood design includes support pads on seamless aluminum tubing for front support, in addition to end caps and galvanized steel framing for even greater strength and protection.

S-2500G

S-2500G

Are you looking for the strongest Serco dock seal for sale? Then you'll find it with the S-2500G Series Guardian® foam dock seal with a two-piece movable head pad system. This dock seal  – ideal for doors as large as 9’x 9’ – actually moves vertically with the trailer, in turn reducing wear on the side pads and head pad and increasing the life of your dock seal.

IDS-HP

IDS-HP

With the Serco Ironside™ model IDS-HP Dock Seal, you can combat challenges at the loading dock, like abrasive movements from air ride suspensions and intermodal trailers and yard spotters that create a prying motion on the seal head pad. This dock seal achieves all of that while also providing superior environmental control. Ideal for doors 9’ wide x 9’ high or less, Ironside™ is made with Serco-exclusive UHWR™ (Ultra High Wear Resistant) fabric, which has been tested and certified to 40,000+ abrasion cycles – up to 10 times the abrasion resistance of the competitive fabrics tested – for superior wear resistance.

IDS-HC

IDS-HC

The Serco Ironside™ model IDS-HC Dock Seal design provides superior environmental control while combating issues such as taller door openings servicing varying height trailers and more abrasive movements from air ride suspensions and intermodal trailers. Made with Serco-exclusive UHWR™ (Ultra High Wear Resistant) fabric, the Secro Ironside™ IDS-HC Dock Seal features superior wear resistance. UHWR™ has been thoroughly tested and certified to 40,000+ abrasion cycles, which is 10 times the abrasion resistance of the competitive fabrics tested.

Find and Order New Dock Seals at Lift, Inc.

Whether you’re looking for the strongest Serco dock seal for sale or a specialized Serco Ironside™, the experts at Lift, Inc. are trained, equipped, and ready to help you order the right solution for your workers. You can take the next step online with our live chat, over the phone with our equipment specialists, or in person at any of our PA locations.

Request Warehouse Products

Questions about what we currently have in stock? Let us know how we can help you out. 

Thanks for your submission!

Contact

Contact

Consignment

Request a Service

×

Lift, Inc. Employee Portal

Please log in using the username and password given to you by IT.

×

Your session will expire in  seconds. If you want to reset this timer, please click OK.