RM/RMD Series Reach Truck
RM/RMD Series Reach Truck
RM/RMD Series Reach Truck
RM/RMD Series Reach Truck
RM/RMD Series Reach Truck
RM/RMD Series Reach Truck
RM/RMD Series Reach Truck
RM/RMD Series Reach Truck

Elevate Your Expectations

By harnessing technology and engineering advancements, Crown has redefined the narrow-aisle reach truck. With Crown’s exclusive MonoLift Mast, this lift truck delivers unprecedented height – up to 505” – along with superior visibility, greater capacity at height, game-changing speed/efficiency, and enviable operator comfort.


Features

  • Set New Standards: The RM/RMD Series reach truck from Crown boasts incredible travel, lift and lower speeds that equate to reduced cycle times and measurable productivity gains. Regenerative lowering captures lost energy and returns it to the battery, equating to fewer battery changes, longer shifts and reduced costs. Crown's Xpress Lower technology increases top lowering speed 110 feet per minute to 240 feet per minute while using no additional energy. With twice the lowering speed, the RM/RMD Series delivers a boost in throughput.

  • Opportunities in Reach: With game-changing height, greater capacity and a smaller footprint, you can make the most of every square foot. Extended loads put tremendous pressure on masts. Crown addresses this challenge with patented, boxed-in cross section mast, which significantly reduces twisting and flexing, associated with conventional, dual upright masts. Capacity is often the compromise in deep reach applications. The RM/RMD Series reach forklift offers optimized weight distribution and stable MonoLift Mast for superior capacity without a wider wheelbase.

  • The RM Series Reach Truck Offers Comfort, Confidence and Control: Ergonomic excellence ensures operator comfort, safety and productivity, even in the most challenging environments. Crown's exclusive OnTrac Anti-Slip Traction Control system greatly reduces tire spin during acceleration, plugging and braking for optimized performance - even on wet, slick or dusty surfaces. The Entry Bar Safety Switch encourages safe foot position within the operator compartment by reducing travel speed, sounding an audible alert and showing a message on the display when depressed.

  • Standout Results: The Crown RM/RMD Series narrow-aisle reach truck offers unmatched, all-around visibility - at ground level, eye level, height and in all directions around the operator.

Specifications

Camera and Color Monitor:
The camera and color monitor provides significant visibility improvements for the operator at height.
Capacity Monitor:
The capacity monitor shows the operator the approximate load weight and indicates to what height the load can be placed.
Crown Extended Warranty:
Extended warranty options for major components and wearables offer long-term protection and peace of mind. Choose from coverage up to five years that best fits your usage and application.
Laser Fork Guide:
The laser fork guide enables the operator to easily position the forks at height for increased precision, productivity and safety.
Lithium-Ion Power:
V-Force Lithium-Ion Energy Storage Systems can improve performance and productivity, with technology that provides more consistent power output throughout the entire battery discharge cycle. Shorter recharge times and better charge acceptance characteristics make them great alternative power solutions for opportunity and fast charging applications.
Quick Change Load Wheels:
The quick change load wheel assembly utilizes a patented design that enables technicians to replace wheels in 2.5 minutes compared to 30-40 minutes for traditional replacements.
Work Assist Accessories:
Work Assist Accessories are designed to make the operator's job faster, easier and more productive.
Xpress Lower:
Xpress Lower enables the operator to more than double traditional lowering speeds, saving time and boosting productivity.

Sit-Down Double Reach Truck (RMD)

The RMD Series is an "S" class rider deep reach truck with MonoLift mast. The large floor surface and seat make the "S" class task-friendly, comfortable and productive.

Single Reach Truck (RM)

The RM Series is a stand-up reach truck that features a MonoLift mast. It can handle a variety of load sizes and stack in aisles as narrow as 8 feet.

Sit-Down Single Reach Truck (RM)

A large floor surface and adjustable seat make the RM an "S" class series. This sit-down reach truck allows operators to sit, stand or lean comfortably.

Double Reach Truck (RMD)

The RMD Series is the only narrow-aisle stand-up reach truck with a MonoLift mast. The forks extend to allow the truck to deposit or retrieve pallets that are positioned in the rack two deep.

  • Features

    Features

    • Set New Standards: The RM/RMD Series reach truck from Crown boasts incredible travel, lift and lower speeds that equate to reduced cycle times and measurable productivity gains. Regenerative lowering captures lost energy and returns it to the battery, equating to fewer battery changes, longer shifts and reduced costs. Crown's Xpress Lower technology increases top lowering speed 110 feet per minute to 240 feet per minute while using no additional energy. With twice the lowering speed, the RM/RMD Series delivers a boost in throughput.

    • Opportunities in Reach: With game-changing height, greater capacity and a smaller footprint, you can make the most of every square foot. Extended loads put tremendous pressure on masts. Crown addresses this challenge with patented, boxed-in cross section mast, which significantly reduces twisting and flexing, associated with conventional, dual upright masts. Capacity is often the compromise in deep reach applications. The RM/RMD Series reach forklift offers optimized weight distribution and stable MonoLift Mast for superior capacity without a wider wheelbase.

    • The RM Series Reach Truck Offers Comfort, Confidence and Control: Ergonomic excellence ensures operator comfort, safety and productivity, even in the most challenging environments. Crown's exclusive OnTrac Anti-Slip Traction Control system greatly reduces tire spin during acceleration, plugging and braking for optimized performance - even on wet, slick or dusty surfaces. The Entry Bar Safety Switch encourages safe foot position within the operator compartment by reducing travel speed, sounding an audible alert and showing a message on the display when depressed.

    • Standout Results: The Crown RM/RMD Series narrow-aisle reach truck offers unmatched, all-around visibility - at ground level, eye level, height and in all directions around the operator.

  • Specifications

    Specifications

    Camera and Color Monitor:
    The camera and color monitor provides significant visibility improvements for the operator at height.
    Capacity Monitor:
    The capacity monitor shows the operator the approximate load weight and indicates to what height the load can be placed.
    Crown Extended Warranty:
    Extended warranty options for major components and wearables offer long-term protection and peace of mind. Choose from coverage up to five years that best fits your usage and application.
    Laser Fork Guide:
    The laser fork guide enables the operator to easily position the forks at height for increased precision, productivity and safety.
    Lithium-Ion Power:
    V-Force Lithium-Ion Energy Storage Systems can improve performance and productivity, with technology that provides more consistent power output throughout the entire battery discharge cycle. Shorter recharge times and better charge acceptance characteristics make them great alternative power solutions for opportunity and fast charging applications.
    Quick Change Load Wheels:
    The quick change load wheel assembly utilizes a patented design that enables technicians to replace wheels in 2.5 minutes compared to 30-40 minutes for traditional replacements.
    Work Assist Accessories:
    Work Assist Accessories are designed to make the operator's job faster, easier and more productive.
    Xpress Lower:
    Xpress Lower enables the operator to more than double traditional lowering speeds, saving time and boosting productivity.
  • Downloads & Documentation
  • Details

    Sit-Down Double Reach Truck (RMD)

    The RMD Series is an "S" class rider deep reach truck with MonoLift mast. The large floor surface and seat make the "S" class task-friendly, comfortable and productive.

    Single Reach Truck (RM)

    The RM Series is a stand-up reach truck that features a MonoLift mast. It can handle a variety of load sizes and stack in aisles as narrow as 8 feet.

    Sit-Down Single Reach Truck (RM)

    A large floor surface and adjustable seat make the RM an "S" class series. This sit-down reach truck allows operators to sit, stand or lean comfortably.

    Double Reach Truck (RMD)

    The RMD Series is the only narrow-aisle stand-up reach truck with a MonoLift mast. The forks extend to allow the truck to deposit or retrieve pallets that are positioned in the rack two deep.

Contact

Contact

Consignment

Request a Service

×

Lift, Inc. Employee Portal

Please log in using the username and password given to you by IT.

×

Your session will expire in . If you want to reset this timer, please click OK.