80V Electric Pneumatic Forklift
80V Electric Pneumatic Forklift
80V Electric Pneumatic Forklift
80V Electric Pneumatic Forklift
80V Electric Pneumatic Forklift
80V Electric Pneumatic Forklift

Overview

Want to maintain an all-electric fleet, but need a rugged, outdoor solution? Look no further than Toyota’s 80V Electric Pneumatic Forklift. These electric powerhouses combine the power, durability, and reliability of internal combustion trucks with the ergonomics and speed of electric forklifts. With a capacity ranging from 5,000-17,500 lb., these machines are ready to tackle any challenge, whether you’re operating indoors or outdoors.

Outdoor Electric Forklift Solution

At Toyota, we understand that you need a forklift that delivers the power and durability to get the job done. Our 80V Electric Pneumatic Forklift is a beast and designed to tackle all of your material handling needs. Rugged enough to perform similar to internal combustion counterparts while running off a battery, Toyota’s 80V Electric Pneumatic Forklift maintains clean air and low maintenance but supports traditional IC applications.

This versatile lift delivers top travel speeds courtesy of the powerfully efficient AC Drive Motor, which provides longer runtimes aided by regenerative braking, giving you the power to get more done quickly. When you need raw power to tackle outdoor challenges and efficient, environmentally friendly operation, look no further than Toyota’s 80V Electric Pneumatic Forklift.


Features

  • ORS (Operator Restraint System) full-suspension vinyl seat

  • Retractable seat belt

  • Overhead guard

  • Operator Presence Sensing System (OPSS)

  • Memory tilt steering column

  • 80-Volt electrical system

  • Planned maintenance indicator

  • Digital multifunction display

  • Regenerative braking

  • AC Lift & Drive motors

  • Easy access, no-tools floorboard

  • Low energy consumption

  • Electric horn

  • Battery compartment hood assist

  • Can-bus controller wiring

  • Heavy-duty, non-slip floor mat

  • System of Active Stability (SAS)™

Specifications

FMP Lift Speed:
96
Length to Forkface:
95.6 - 143.7 in
Load Capacity:
5,000 - 17,500 lb. Load Capacity
Overall Width:
47 - 84.3 in
Overhead Guard Height:
87.2 - 111.6 in
Travel Speed Full Load:
10 - 11.8 mph Travel Speed Full Load
Voltage:
80 Voltage

Advanced Technology at Your Fingertips

Knowledge and information power your productivity. Toyota’s 80V Electric Pneumatic Forklifts come equipped with a multifunction display that provides key information such as an operating time display and battery capacity warning. Standard speed control and performance modes allow selection of power consumption, acceleration, and regenerative braking force, allowing tuning to maximize truck performance to your operation while balancing performance and operating time, leading to improved efficiency. Built-in diagnostics with error code displays allow troubleshooting through the display to quickly diagnose any issues and increase uptime.

80V Electric Pneumatic Forklift

Model Number Load Capacity* (lbs.) Max. Travel Speed Full Load (MPH) Max. Lift Speed Full Load (FPM) Max. Gradeability Full Load (%) Basic Right Angle Stack** (IN.)
05-8FBM25T 5,000 11.8 91 15-24 100.7
05-8FBM40T 8,000 11 68.9 11.3-15 120.5
05-8FBM45T 9,000 11 68.9 9.5-14 121.1
05-8FMB50T 11,000 11 65 8.8-13 126.5
9FBM60T 13,000 11 75 7-19 146
9FBM70T 15,500 11 71 6.3-18 146
9FBM80T 17,500 11 63 5.6-16 146.5
9FBH80T 17,500 10 63 5.2-16 152
  • Features

    Features

    • ORS (Operator Restraint System) full-suspension vinyl seat

    • Retractable seat belt

    • Overhead guard

    • Operator Presence Sensing System (OPSS)

    • Memory tilt steering column

    • 80-Volt electrical system

    • Planned maintenance indicator

    • Digital multifunction display

    • Regenerative braking

    • AC Lift & Drive motors

    • Easy access, no-tools floorboard

    • Low energy consumption

    • Electric horn

    • Battery compartment hood assist

    • Can-bus controller wiring

    • Heavy-duty, non-slip floor mat

    • System of Active Stability (SAS)™

  • Specifications

    Specifications

    FMP Lift Speed:
    96
    Length to Forkface:
    95.6 - 143.7 in
    Load Capacity:
    5,000 - 17,500 lb. Load Capacity
    Overall Width:
    47 - 84.3 in
    Overhead Guard Height:
    87.2 - 111.6 in
    Travel Speed Full Load:
    10 - 11.8 mph Travel Speed Full Load
    Voltage:
    80 Voltage
  • Downloads & Documentation
  • Details

    Advanced Technology at Your Fingertips

    Knowledge and information power your productivity. Toyota’s 80V Electric Pneumatic Forklifts come equipped with a multifunction display that provides key information such as an operating time display and battery capacity warning. Standard speed control and performance modes allow selection of power consumption, acceleration, and regenerative braking force, allowing tuning to maximize truck performance to your operation while balancing performance and operating time, leading to improved efficiency. Built-in diagnostics with error code displays allow troubleshooting through the display to quickly diagnose any issues and increase uptime.

    80V Electric Pneumatic Forklift

    Model Number Load Capacity* (lbs.) Max. Travel Speed Full Load (MPH) Max. Lift Speed Full Load (FPM) Max. Gradeability Full Load (%) Basic Right Angle Stack** (IN.)
    05-8FBM25T 5,000 11.8 91 15-24 100.7
    05-8FBM40T 8,000 11 68.9 11.3-15 120.5
    05-8FBM45T 9,000 11 68.9 9.5-14 121.1
    05-8FMB50T 11,000 11 65 8.8-13 126.5
    9FBM60T 13,000 11 75 7-19 146
    9FBM70T 15,500 11 71 6.3-18 146
    9FBM80T 17,500 11 63 5.6-16 146.5
    9FBH80T 17,500 10 63 5.2-16 152

Contact

Contact

Consignment

Request a Service

×

Lift, Inc. Employee Portal

Please log in using the username and password given to you by IT.

×

Your session will expire in . If you want to reset this timer, please click OK.